Datasheet
TLV320AIC3106
SLAS509E – DECEMBER 2006 – REVISED DECEMBER 2008 ........................................................................................................................................
www.ti.com
Page 0 / Register 82: DAC_L1 to LEFT_LOP/M Volume Control Register
READ/ RESET
BIT DESCRIPTION
WRITE VALUE
D7 R/W 0 DAC_L1 Output Routing Control
0: DAC_L1 is not routed to LEFT_LOP/M
1: DAC_L1 is routed to LEFT_LOP/M
D6 – D0 R/W 000 0000 DAC_L1 to LEFT_LOP/M Analog Volume Control
For 7-bit register setting versus analog gain values, see Table 5
Page 0 / Register 83: LINE2R to LEFT_LOP/M Volume Control Register
READ/ RESET
BIT DESCRIPTION
WRITE VALUE
D7 R/W 0 LINE2R Output Routing Control
0: LINE2R is not routed to LEFT_LOP/M
1: LINE2R is routed to LEFT_LOP/M
D6 – D0 R/W 000 0000 LINE2R to LEFT_LOP/M Analog Volume Control
For 7-bit register setting versus analog gain values, see Table 5
Page 0 / Register 84: PGA_R to LEFT_LOP/M Volume Control Register
READ/ RESET
BIT DESCRIPTION
WRITE VALUE
D7 R/W 0 PGA_R Output Routing Control
0: PGA_R is not routed to LEFT_LOP/M
1: PGA_R is routed to LEFT_LOP/M
D6 – D0 R/W 000 0000 PGA_R to LEFT_LOP/M Analog Volume Control
For 7-bit register setting versus analog gain values, see Table 5
Page 0 / Register 85: DAC_R1 to LEFT_LOP/M Volume Control Register
READ/ RESET
BIT DESCRIPTION
WRITE VALUE
D7 R/W 0 DAC_R1 Output Routing Control
0: DAC_R1 is not routed to LEFT_LOP/M
1: DAC_R1 is routed to LEFT_LOP/M
D6 – D0 R/W 000 0000 DAC_R1 to LEFT_LOP/M Analog Volume Control
For 7-bit register setting versus analog gain values, see Table 5
Page 0 / Register 86: LEFT_LOP/M Output Level Control Register
READ/ RESET
BIT DESCRIPTION
WRITE VALUE
D7 – D4 R/W 0000 LEFT_LOP/M Output Level Control
0000: Output level control = 0 dB
0001: Output level control = 1 dB
0010: Output level control = 2 dB
...
1000: Output level control = 8 dB
1001: Output level control = 9 dB
1010 – 1111: Reserved. Do not write these sequences to these register bits.
D3 R/W 0 LEFT_LOP/M Mute
0: LEFT_LOP/M is muted
1: LEFT_LOP/M is not muted
D2 R 0 Reserved. Don ’ t write to this register bit.
D1 R 1 LEFT_LOP/M Volume Control Status
0: All programmed gains to LEFT_LOP/M have been applied
1: Not all programmed gains to LEFT_LOP/M have been applied yet
D0 R 0 LEFT_LOP/M Power Status
0: LEFT_LOP/M is not fully powered up
1: LEFT_LOP/M is fully powered up
74 Submit Documentation Feedback Copyright © 2006 – 2008, Texas Instruments Incorporated
Product Folder Link(s): TLV320AIC3106