Datasheet

TLV320AIC3104
SLAS510C –FEBRUARY 2007–REVISED DECEMBER 2010 www.ti.com
Output Stage Volume Controls
A basic analog volume control with range from 0 dB to –78 dB and mute is replicated multiple times in the output
stage network, connected to each of the analog signals that route to the output stage. In addition, to enable
completely independent mixing operations to be performed for each output driver, each analog signal coming into
the output stage may have up to seven separate volume controls. These volume controls all have approximately
0.5-dB step programmability over most of the gain range, with steps increasing slightly at the lowest attenuations.
Table 19 lists the detailed gain versus programmed setting for this basic volume control.
60 Submit Documentation Feedback Copyright © 2007–2010, Texas Instruments Incorporated
Product Folder Links: TLV320AIC3104