Datasheet
TLV320AIC3100
SLAS667A –NOVEMBER 2009–REVISED MAY 2012
www.ti.com
Page 0 / Register 31: Codec Secondary Interface Control 1
READ/ RESET
BIT DESCRIPTION
WRITE VALUE
D7–D5 R/W 000 000: Secondary BCLK is obtained from GPIO1 pin.
001: Reserved
010: Reserved
011: Secondary BCLK is obtained from DOUT pin.
100: Reserved
101: Reserved
110: Reserved
111: Reserved
D4–D2 R/W 000 000: Secondary WCLK is obtained from GPIO1 pin.
001: Reserved
010: Reserved
011: Secondary WCLK is obtained from DOUT pin.
100: Reserved
101: Reserved
110: Reserved
111: Reserved
D1–D0 R/W 00 00: Secondary DIN is obtained from the GPIO1 pin.
01: Reserved
10: Reserved
11: Reserved
Page 0 / Register 32: Codec Secondary Interface Control 2
READ/ RESET
BIT DESCRIPTION
WRITE VALUE
D7–D5 R/W 000 000: ADC_WCLK is obtained from GPIO1 pin.
001: Reserved
010: Reserved
011: Reserved
100: Reserved
101: Reserved
110: Reserved
111: Reserved
D4 R/W 0 Reserved
D3 R/W 0 0: Primary BCLK is fed to codec serial-interface and ClockGen blocks.
1: Secondary BCLK is fed to codec serial-interface and ClockGen blocks.
D2 R/W 0 0: Primary WCLK is fed to codec serial-interface block.
1: Secondary WCLK is fed to codec serial-interface block.
D1 R/W 0 0: ADC_WCLK used in the codec serial-interface block is the same as DAC_WCLK.
1: ADC_WCLK used in the codec serial-interface block = ADC_WCLK.
D0 R/W 0 0: Primary DIN is fed to codec serial-interface block.
1: Secondary DIN is fed to codec serial-interface block.
Page 0 / Register 33: Codec Secondary Interface Control 3
READ/ RESET
BIT DESCRIPTION
WRITE VALUE
D7 R/W 0 0: Primary BCLK output = internally generated BCLK clock
1: Primary BCLK output = secondary BCLK
D6 R/W 0 0: Secondary BCLK output = primary BCLK
1: Secondary BCLK output = internally generated BCLK clock
D5–D4 R/W 00 00: Primary WCLK output = internally generated DAC_f
S
01: Primary WCLK output = internally generated ADC_f
S
clock
10: Primary WCLK output = secondary WCLK
11: Reserved
D3–D2 R/W 00 00: Secondary WCLK output = primary WCLK
01: Secondary WCLK output = internally generated DAC_f
S
clock
10: Secondary WCLK output = internally generated ADC_f
S
clock
11: Reserved
D1 R/W 0 0: Primary DOUT = DOUT from codec serial-interface block
1: Primary DOUT = secondary DIN
D0 R/W 0 0: Secondary DOUT = primary DIN
1: Secondary DOUT = DOUT from codec serial interface block
88 REGISTER MAP Copyright © 2009–2012, Texas Instruments Incorporated
Submit Documentation Feedback
Product Folder Link(s): TLV320AIC3100