Datasheet

www.ti.com

AIC3110/AIC3100/AIC3120 EVM

A simple example is to program the AIC3110/AIC3100/AIC3120 initialization script from the CodecControl

software to the boot application. Afterwards, the EVM acts as a USB sound card without requiring the

CodecControl software.

3.4 Jumpers, Connectors, Test

W1: 1-2: Select analog volume control potentiometer.

2-3: Select microphone detection.

W2: insert to apply right channel mic-bias voltage to microphone connector.

W3: insert to apply left channel mic-bias voltage to microphone connector.

W4: AVDD wire loop. Cut and insert ampere meter to measure AVDD current.

W5: SPVDD wire loop. Cut and insert ampere meter to measure SPVDD current.

W6: HPVDD wire loop. Cut and insert ampere meter to measure HPVDD current.

W7: DVDD wire loop. Cut and insert ampere meter to measure DVDD current.

W8: IOVDD wire loop. Cut and insert ampere meter to measure IOVDD current.

TP1: I2C SCL

TP2: I2C SDA

TP3: MCLK for codec

TP4: I2S™ DIN to codec

TP5: I2S BCLK

TP6: I2S DOUT from codec

TP7: I2S WCLK

TP12: Reset

TP13: GPIO1 from codec

TP14: GND

TP15:

TP8, TP9, TP10, TP11, TP12: Not used by AIC3110/AIC3100/AIC3120

J1: mini USB-B connector

J2: Microphone input

J3: Class-D speaker terminal

J4: Headphone output

SW1: Reset codec

SW2: Select EVM application

SW3: Select patch script

SLAU307–February 2010 ACEV-1A EVM

Submit Documentation Feedback