Datasheet
TLV320AIC3007
SLOS619 – APRIL 2009 .....................................................................................................................................................................................................
www.ti.com
Page 0 / Register 99: Reserved
BIT READ/ RESET DESCRIPTION
WRITE VALUE
D7 – D0 R 00000000 Reserved. Do not write to this register.
Page 0 / Register 100: Reserved
BIT READ/ RESET DESCRIPTION
WRITE VALUE
D7 – D0 R 00000000 Reserved. Do not write to this register.
Page 0 / Register 101: CODEC CLKIN Source Selection Register
BIT READ/ RESET DESCRIPTION
WRITE VALUE
D7 – D1 R 0 Reserved. Do not write to these register bits.
D0 R/W 0 CODEC_CLKIN Source Selection
0: CODEC_CLKIN uses PLLDIV_OUT
1: CODEC_CLKIN uses CLKDIV_OUT
Page 0 / Register 102: Clock Generation Control Register
BIT READ/ RESET DESCRIPTION
WRITE VALUE
D7-D6 R/W 00 CLKDIV_IN Source Selection
00: CLKDIV_IN uses MCLK
01: Reserved. Do not use.
10: CLKDIV_IN uses BCLK
11: Reserved. Do not use.
D5-D4 R/W 00 PLLCLK_IN Source Selection
00: PLLCLK_IN uses MCLK
01: Reserved. Do not use.
10: PLLCLK _IN uses BCLK
11: Reserved. Do not use.
D3-D0 R/W 0010 PLL Clock Divider N Value
0000: N=16
0001: N=17
0010: N=2
0011: N=3
…
1111: N=15
Page 0 / Register 103: Left AGC New Programmable Attack Time Register
BIT READ/ RESET DESCRIPTION
WRITE VALUE
D7 R/W 0 Attack Time Register Selection
0: Attack time for the Left AGC is generated from Register 26.
1: Attack time for the Left AGC is generated from this Register.
D6-D5 R/W 00 Baseline AGC Attack time
00: Left AGC Attack time = 7-msec
01: Left AGC Attack time = 8-msec
10: Left AGC Attack time = 10-msec
11: Left AGC Attack time = 11-msec
D4-D2 R/W 000 Multiplication Factor for Baseline AGC
000: Multiplication factor for the baseline AGC Attack time = 1
001: Multiplication factor for the baseline AGC Attack time = 2
010: Multiplication factor for the baseline AGC Attack time = 4
011: Multiplication factor for the baseline AGC Attack time = 8
100: Multiplication factor for the baseline AGC Attack time = 16
101: Multiplication factor for the baseline AGC Attack time = 32
110: Multiplication factor for the baseline AGC Attack time = 64
111: Multiplication factor for the baseline AGC Attack time = 128
D1-D0 R/W 00 Reserved. Write only zero to these register bits.
78 Submit Documentation Feedback Copyright © 2009, Texas Instruments Incorporated
Product Folder Link(s) :TLV320AIC3007