Datasheet

TLV320AIC3007
SLOS619 – APRIL 2009 ..................................................................................................................................................................................................... www.ti.com
Page 0 / Register 50: DAC_R1 to HPLOUT Volume Control Register
BIT READ/ RESET DESCRIPTION
WRITE VALUE
D7 R/W 0 DAC_R1 Output Routing Control
0: DAC_R1 is not routed to HPLOUT
1: DAC_R1 is routed to HPLOUT
D6-D0 R/W 0000000 DAC_R1 to HPLOUT Analog Volume Control
For 7-bit register setting versus analog gain values, see Table 5
Page 0 / Register 51: HPLOUT Output Level Control Register
BIT READ/ RESET DESCRIPTION
WRITE VALUE
D7-D4 R/W 0000 HPLOUT Output Level Control
0000: Output level control = 0 dB
0001: Output level control = 1 dB
0010: Output level control = 2 dB
...
1000: Output level control = 8 dB
1001: Output level control = 9 dB
1010 – 1111: Reserved. Do not write these sequences to these register bits.
D3 R/W 0 HPLOUT Mute
0: HPLOUT is muted
1: HPLOUT is not muted
D2 R/W 1 HPLOUT Power Down Drive Control
0: HPLOUT is weakly driven to a common-mode when powered down
1: HPLOUT is 3-stated with powered down
D1 R 1 HPLOUT Volume Control Status
0: All programmed gains to HPLOUT have been applied
1: Not all programmed gains to HPLOUT have been applied yet
D0 R/W 0 HPLOUT Power Control
0: HPLOUT is not fully powered up
1: HPLOUT is fully powered up
Page 0 / Register 52: LINE2L to HPCOM Volume Control Register
BIT READ/ RESET DESCRIPTION
WRITE VALUE
D7 R/W 0 LINE2L Output Routing Control
0: LINE2L is not routed to HPCOM
1: LINE2L is routed to HPCOM
D6-D0 R/W 0000000 LINE2L to HPCOM Analog Volume Control
For 7-bit register setting versus analog gain values, see Table 5
Page 0 / Register 53: PGA_L to HPCOM Volume Control Register
BIT READ/ RESET DESCRIPTION
WRITE VALUE
D7 R/W 0 PGA_L Output Routing Control
0: PGA_L is not routed to HPCOM
1: PGA_L is routed to HPCOM
D6-D0 R/W 0000000 PGA_L to HPCOM Analog Volume Control
For 7-bit register setting versus analog gain values, see Table 5
Page 0 / Register 54: DAC_L1 to HPCOM Volume Control Register
BIT READ/ RESET DESCRIPTION
WRITE VALUE
D7 R/W 0 DAC_L1 Output Routing Control
0: DAC_L1 is not routed to HPCOM
1: DAC_L1 is routed to HPCOM
D6-D0 R/W 0000000 DAC_L1 to HPCOM Analog Volume Control
For 7-bit register setting versus analog gain values, see Table 5
66 Submit Documentation Feedback Copyright © 2009, Texas Instruments Incorporated
Product Folder Link(s) :TLV320AIC3007