Datasheet
TLV320AIC3007
www.ti.com
..................................................................................................................................................................................................... SLOS619 – APRIL 2009
Page 0 / Register 19: LINE1L to Left ADC Control Register
BIT READ/ RESET DESCRIPTION
WRITE VALUE
D7 R/W 0 LINE1L Single-Ended vs Fully Differential Control
If LINE1L is selected to both left and right ADC channels, both connections must use the same
configuration (single-ended or fully differential mode).
0: LINE1L is configured in single-ended mode
1: LINE1L is configured in fully differential mode
D6 – D3 R/W 1111 LINE1L Input Level Control for Left ADC PGA Mix
Setting the input level control to a gain below automatically connects LINE1L to the left ADC
PGA mix
0000: Input level control gain = 0.0 dB
0001: Input level control gain = – 1.5 dB
0010: Input level control gain = – 3.0 dB
0011: Input level control gain = – 4.5 dB
0100: Input level control gain = – 6.0 dB
0101: Input level control gain = – 7.5 dB
0110: Input level control gain = – 9.0 dB
0111: Input level control gain = – 10.5 dB
1000: Input level control gain = – 12.0 dB
1001 – 1110: Reserved. Do not write these sequences to these register bits
1111: LINE1L is not connected to the left ADC PGA
D2 R/W 0 Left ADC Channel Power Control
0: Left ADC channel is powered down
1: Left ADC channel is powered up
D1 – D0 R/W 00 Left ADC PGA Soft-Stepping Control
00: Left ADC PGA soft-stepping at once per Fs
01: Left ADC PGA soft-stepping at once per two Fs
10 – 11: Left ADC PGA soft-stepping is disabled
Page 0 / Register 20: LINE2L to Left ADC Control Register
(1)
BIT READ/ RESET DESCRIPTION
WRITE VALUE
D7 R/W 0 LINE2L Single-Ended vs Fully Differential Control
If LINE2L is selected to both left and right ADC channels, both connections must use the same
configuration (single-ended or fully differential mode).
0: LINE2L is configured in single-ended mode
1: LINE2L is configured in fully differential mode
D6 – D3 R/W 1111 LINE2L Input Level Control for Left ADC PGA Mix
0000: Input level control gain = 0.0 dB
0001-0011: Reserved. Do not write these sequences to these register bits
0100: Input level control gain = – 6.0 dB
0101-0111: Reserved. Do not write these sequences to these register bits
1000: Input level control gain = – 12.0 dB
1001-1110: Reserved. Do not write these sequences to these register bits
1111: LINE2L is not connected to the left ADC PGA
D2 R/W 0 Left ADC Channel Weak Common-Mode Bias Control
0: Left ADC channel unselected inputs are not biased weakly to the ADC common-mode voltage
1: Left ADC channel unselected inputs are biased weakly to the ADC common- mode voltage
D1-D0 R 00 Reserved. Write only zeros to these register bits
(1) LINE1R SEvsFD control is available for both left and right channels. However this setting must be same for both the channels.
Copyright © 2009, Texas Instruments Incorporated Submit Documentation Feedback 55
Product Folder Link(s) :TLV320AIC3007