Datasheet
ABSOLUTE MAXIMUM RATINGS
DISSIPATION RATINGS
(1)
TLV320AIC3007
www.ti.com
..................................................................................................................................................................................................... SLOS619 – APRIL 2009
PIN FUNCTIONS (continued)
PIN NAME I/O DESCRIPTION
26 SPOP O Class-D positive differential output
27 NC No Connect
28 NC No Connect
29 NC No Connect
30 NC No Connect
31 RESET I Reset
32 GPIO1 I/O General-purpose input/output
33 DVDD P Digital core voltage supply, 1.525 V – 1.95 V
34 MCLK I Master clock input
35 BCLK I/O Audio serial data bus bit clock (input/output)
36 WCLK I/O Audio serial data bus word clock (input/output)
37 DIN I Audio serial data bus data input (input)
38 DOUT O Audio serial data bus data output (output)
39 DVSS G Digital core / I/O ground supply, 0 V
40 IOVDD P I/O voltage supply, 1.1 V – 3.6 V
over operating free-air temperature range (unless otherwise noted)
(1) (2)
VALUE UNIT
AVDD_DAC to AVSS_DAC, DRVDD to DRVSS, AVSS_ADC – 0.3 to 3.9 V
SPVDD to SPVSS – 0.3 to 6.0 V
AVDD to DRVSS – 0.3 to 3.9 V
IOVDD to DVSS – 0.3 to 3.9 V
DVDD to DVSS – 0.3 to 2.5 V
AVDD_DAC to DRVDD – 0.1 to 0.1 V
Digital input voltage to DVSS – 0.3 to IOVDD + 0.3 V
Analog input voltage to AVSS_ADC – 0.3 to AVDD + 0.3 V
Operating temperature range -40 to 85 ° C
Storage temperature range -65 to 105 ° C
T
J
Max Junction temperature 105 ° C
Power dissipation (T
J
Max – T
A
)/ θ
JA
θ
JA
Thermal impedance, QFN package 34 ° C/W
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) ESD compliance tested to EIA/JESD22-A114-B and passed.
T
A
= 25 ° C DERATING T
A
= 75 ° C T
A
= 85 ° C
PACKAGE TYPE
POWER RATING FACTOR POWER RATING POWER RATING
QFN 2.35 W 29.4 mW/ ° C 882 mW 588 mW
(1) This data was taken using 2 oz. trace and copper pad that is soldered directly to a JEDEC standard 4-layer 3 in × 3 in PCB.
Copyright © 2009, Texas Instruments Incorporated Submit Documentation Feedback 5
Product Folder Link(s) :TLV320AIC3007