Datasheet
ANALOG LINE OUTPUT DRIVERS
VOLUME
CONTROLS,
MIXING
LINE2L
LINE2R
PGA_L
PGA_R
DAC_L1
DAC_R1
DAC_L3
LEFT_LOP
Gain=0dBto+9dB,
Mute
LINE2L
LINE2R
PGA_L
PGA_R
DAC_L1
DAC_R1
DAC_R3
RIGHT_LOP
Gain=0dBto+9dB,
Mute
DAC_L
DAC_L1
DAC_L2
DAC_L3
DAC_R
DAC_R1
DAC_R2
DAC_R3
STEREO
AUDIO
DAC
VOLUME
CONTROLS,
MIXING
TLV320AIC3007
www.ti.com
..................................................................................................................................................................................................... SLOS619 – APRIL 2009
The TLV320AIC3007 has two single-ended line output drivers, each capable of driving a 10-k Ω load. The output
stage design leading to the fully differential line output drivers is shown in Figure 33 and Figure 34 . This design
includes extensive capability to adjust signal levels independently before any mixing occurs, beyond that already
provided by the PGA gain and the DAC digital volume control.
The LINE2L/R signals refer to the signals that travel through the analog input bypass path to the output stage.
The PGA_L/R signals refer to the outputs of the ADC PGA stages that are similarly passed around the ADC to
the output stage. Note that since both left and right channel signals are routed to all output drivers, a mono mix
of any of the stereo signals can easily be obtained by setting the volume controls of both left and right channel
signals to – 6 dB and mixing them. Undesired signals can also be disconnected from the mix as well through
register control.
Figure 33. Architecture of the Output Stage Leading to the Line Output Drivers
Copyright © 2009, Texas Instruments Incorporated Submit Documentation Feedback 41
Product Folder Link(s) :TLV320AIC3007