Calculator User Manual

www.ti.com Kit Operation
Figure 14. File Menu
The Options menu (Figure 15 ) provides two settings suitable for command line interface users and for
troubleshooting. These settings allows the user to evaluate the device in its most basic form.
The first option, Hardware Reset on Startup, enables (checked) and disables (unchecked) the hardware
reset commands every time the GUI starts. If checked, a series of commands will be sent to the TAS1020
to hardware reset the TLV320AIC12K/14K at startup. If unchecked, nothing will be written to the
TLV320AIC12K/14K when the GUI starts. This option is useful if the user wants to keep the registers
intact when closing and re-opening the GUI. Keep in mind that, every time the EVM-K is connected or
reconnected, a hardware reset must be done in order to write to the codec either by pushing the Hardware
Reset button on the GUI, pressing the push-button on the EVM or by using the command line interface.
The second option, Hardware Reset on USB reconnection, enables (checked) and disables (unchecked)
the hardware reset commands every time the EVM-K is reconnected while using the GUI. If unchecked, a
manual hardware reset must be done if writing to the codec as stated on the paragraph above.
Figure 15. Options Menu
Under the Help menu is an About... menu item (Figure 16 ) which displays information about the
TLV320AIC12KEVMB/14KEVMB software.
SLAU229B – October 2007 – Revised August 2008 TLV320AIC12KEVMB-K and TLV320AIC14KEVMB-K User's Guide 21
Submit Documentation Feedback