Datasheet

Kit Operation

www.ti.com

Table 6. USB-MODEVM SW2 Settings

SW-2 SWITCH

NUMBER LABEL SWITCH DESCRIPTION

USB-MODEVM EEPROM I

C Address A0

1 A0 ON: A0 = 0

OFF: A0 = 1

USB-MODEVM EEPROM I

C Address A1

2 A1 ON: A1 = 0

OFF: A1 = 1

USB-MODEVM EEPROM I

C Address A2

3 A2 ON: A2 = 0

OFF: A2 = 1

Digital Audio Bus Source Selection

4 USB I

S ON: Digital Audio Bus connects to TAS1020

OFF: Digital Audio Bus connects to USB-MODEVM J14

Digital Audio Bus MCLK Source Selection

5 USB MCK ON: MCLK connects to TAS1020

OFF: MCLK connects to USB-MODEVM J14

SPI Bus Source Selection

6 USB SPI ON: SPI Bus connects to TAS1020

OFF: SPI Bus connects to USB-MODEVM J15

RST Source Selection

7 USB RST ON: EVM Reset Signal comes from TAS1020

OFF: EVM Reset Signal comes from USB-MODEVM J15

External MCLK Selection

8 EXT MCK ON: MCLK Signal is provided from USB-MODEVM J10

OFF: MCLK Signal comes from either selection of SW2-5

For use with the TLV320AIC1106EVM, set SW-2 positions 1, 3, 6, and 7 to ON; set SW-2 positions 2, 4,

5, and 8 to OFF.

TLV320AIC1106EVM-K SLAU328A–October 2010–Revised January 2011

Submit Documentation Feedback