Datasheet
EVM Bill of Materials
www.ti.com
Table 11. USB-MODEVM Bill of Materials (continued)
Designators Description Manufacturer Mfg. Part Number
TP7, TP8 Multipurpose test point Keystone Electronics 5011
terminal
J7 USB type B slave connector Mill-Max 897-30-004-90-000000
thru-hole
J1, J2, J3, J4, J5, J8 2-position terminal block On Shore Technology ED555/2DS
J9 2.5mm power connector CUI Stack PJ-102B
J10 BNC connector, female, AMP/Tyco 414305-1
PC mount
J11A, J12A, J21A, J22A 20-pin SMT plug Samtec TSM-110-01-L-DV-P
J11B, J12B, J21B, J22B 20-pin SMT socket Samtec SSW-110-22-F-D-VS-K
J13A, J23A 10-pin SMT plug Samtec TSM-105-01-L-DV-P
J13B, J23B 10-pin SMT socket Samtec SSW-105-22-F-D-VS-K
J6 4-pin double row header (2x2) Samtec TSW-102-07-L-D
0.1"
J14, J15 12-pin double row header (2x6) Samtec TSW-106-07-L-D
0.1"
JMP1–JMP4 2-position jumper, Samtec TSW-102-07-L-S
0.1" spacing
JMP8–JMP14 2-position jumper, Samtec TSW-102-07-L-S
0.1" spacing
JMP5, JMP6 3-position jumper, Samtec TSW-103-07-L-S
0.1" spacing
JMP7 3-position dual row jumper, Samtec TSW-103-07-L-D
0.1" spacing
SW1 SMT, half-pitch C&K Division, ITT TDA02H0SK1
2-position switch
SW2 SMT, half-pitch C&K Division, ITT TDA08H0SK1
8-position switch
Jumper plug Samtec SNT-100-BK-T
26
TLV320AIC1103/1110EVM-K SLAU297A–November 2009–Revised January 2011
Submit Documentation Feedback
© 2009–2011, Texas Instruments Incorporated