Datasheet

www.ti.com
ELECTRICAL CHARACTERISTICS (continued)
OPERATING CHARACTERISTICS
TLV2470 , , TLV2471
TLV2472 , TLV2473
TLV2474 , TLV2475 , TLV247xA
SLOS232E – JUNE 1999 – REVISED JULY 2007
At specified free-air temperature, V
DD
= 5V, unless otherwise noted.
PARAMETER TEST CONDITIONS T
A
(1)
MIN TYP MAX UNIT
+25 ° C 1000 2500
Supply current in shutdown mode
nA
I
DD(SHDN)
(TLV2470, TLV2473, TLV2475) SHDN = 0V TLV247xC Full range 3000
(per channel)
TLV247xI Full range 6000 nA
(1) Full range is 0 ° C to +70 ° C for C-suffix and –40 ° C to +125 ° C for I-suffix. If not specified, full range is –40 ° C to +125 ° C.
At specified free-air temperature, V
DD
= 5V, unless otherwise noted.
PARAMETER TEST CONDITIONS T
A
(1)
MIN TYP MAX UNIT
+25 ° C 1.1 1.5
SR Slew rate at unity gain V
O(PP)
= 2V, C
L
= 150pF, R
L
= 10k Ω V/ μ s
Full range 0.7
f = 100Hz +25 ° C 28
Equivalent input noise
V
n
nV/ √ Hz
voltage
f = 1kHz +25 ° C 15
Equivalent input noise
I
n
f = 1kHz +25 ° C 0.39 pA/ √ Hz
current
A
V
= 1 0.01%
V
O(PP)
= 4V,
Total harmonic
THD + N R
L
= 10k Ω , A
V
= 10 +25 ° C 0.05%
distortion plus noise
f = 1kHz
A
V
= 100 0.3%
t
(on)
Amplifier turn-on time +25 ° C 5 μ s
R
L
= OPEN
(2)
t
(off)
Amplifier turn-off time +25 ° C 250 ns
Gain-bandwidth
f = 10kHz, R
L
= 600 Ω +25 ° C 2.8 MHz
product
V
(STEP)PP
= 2V, 0.1% 1.8
A
V
= –1, C
L
= 10pF,
0.01% 3.3
R
L
= 10k Ω
t
s
Settling time +25 ° C μ s
V
(STEP)PP
= 2V, 0.1% 1.7
A
V
= –1, C
L
= 56pF,
0.01% 3
R
L
= 10k Ω
Φ
m
Phase margin R
L
= 10k Ω , C
L
= 1000pF +25 ° C 68 ° C
Gain margin R
L
= 10k Ω , C
L
= 1000pF +25 ° C 23 dB
(1) Full range is 0 ° C to +70 ° C for C suffix and –40 ° C to +125 ° C for I suffix. If not specified, full range is –40 ° C to +125 ° C.
(2) Disable and enable time are defined as the interval between application of logic signal to SHDN and the point at which the supply
current has reached half its final value.
8
Submit Documentation Feedback