Datasheet

TLK105
TLK106
www.ti.com SLLSEB8A –AUGUST 2012–REVISED MARCH 2013
8.1.5 Auto-Negotiation Advertisement Register (ANAR)
This register contains the advertised abilities of this device as they are transmitted to its link partner during
Auto-Negotiation.
Table 8-8. Auto Negotiation Advertisement Register (ANAR), address 0x0004
BIT BIT NAME DEFAULT DESCRIPTION
15 NP 0, RW Next Page Indication:
0 = Next Page Transfer not desired
1 = Next Page Transfer desired
14 RESERVED 0, RO/P RESERVED by IEEE: Writes ignored, Read as 0
13 RF 0, RW Remote Fault:
1 = Advertises that this device has detected a Remote Fault
0 = No Remote Fault detected
12 RESERVED 0, RW RESERVED for Future IEEE use: Write as 0, Read as 0
11 ASM_DIR 0, RW Asymmetric PAUSE Support for Full Duplex Links: The ASM_DIR bit indicates that asymmetric
PAUSE is supported.
1 = Asymmetric PAUSE implemented. Advertise that the DTE/MAC has implemented both the
optional MAC control sublayer and the pause function as specified in clause 31 and annex 31B
of IEEE802.3u.
0 = Asymmetric PAUSE not implemented
Encoding and resolution of PAUSE bits is defined in IEEE 802.3 Annex 28B, Tables 28B-2 and 28B-
3, respectively. Pause resolution status is reported in PHYCR[13:12].
10 PAUSE 0, RW PAUSE Support for Full Duplex Links: The PAUSE bit indicates that the device is capable of
providing the symmetric PAUSE functions as defined in Annex 31B.
1 = MAC PAUSE implemented. Advertise that the DTE (MAC) has implemented both the optional
MAC control sub-layer and the pause function as specified in clause 31 and annex 31B of
802.3u.
0 = MAC PAUSE not implemented
Encoding and resolution of PAUSE bits is defined in IEEE 802.3 Annex 28B, Tables 28B-2 and 28B-
3, respectively. Pause resolution status is reported in PHYCR[13:12].
9 100B-T4 0, RO/P 100Base-T4 Support:
1 = 100Base-T4 is supported by the local device
0 = 100Base-T4 not supported
8 100B-TX_FD 1, RW 100Base-TX Full Duplex Support:
1 = 100Base-TX Full Duplex is supported by the local device
0 = 100Base-TX Full Duplex not supported
7 100B-TX 1, RW 100Base-TX Support:
1 = 100Base-TX is supported by the local device
0 = 100Base-TX not supported
6 10B-T_FD 1, RW 10Base-T Full Duplex Support:
1 = 10Base-T Full Duplex is supported by the local device
0 = 10Base-T Full Duplex not supported
5 10B-T 1, RW 10Base-T Support:
1 = 10Base-T is supported by the local device
0 = 10Base-T not supported
4:0 Selector <00001>, RW Protocol Selection Bits:
These bits contain the binary encoded protocol selector supported by this port. <00001> indicates that
this device supports IEEE 802.3u.
Copyright © 2012–2013, Texas Instruments Incorporated Register Block 47
Submit Documentation Feedback
Product Folder Links: TLK105 TLK106