Datasheet

6544328

B NA

COVER PAGE AND NOTES

SIZE DOCUMENT NUMBER REV SHEET

SCHEMATIC TITLE

PAGE TITLE

1 of 4

TEXAS INSTRUMENTS

D D

C C

B B

A A

TLK10034 EVM

SMA BREAKOUT DAUGHTER BOARD

SCHEMATIC SHEET INDEX:

SHEET 01: TLK10034 EVM SMA BREAKOUT DAUGHTER BOARD COVER SHEET AND NOTES

SHEET 02: CHANNEL A/D SIGNALS

SHEET 03: CHANNEL B/C SIGNALS

SHEET 04: COMMON SIGNALS

NOTES:

1. PLACE NET NAMES ON ALL JUMPERS AND HEADERS.

2. PLACE ALL PARTS OTHER THAN SMA CONNECTORS ON A 0 OR 90 DEGREE ORIENTATION.

3. SERIAL DATA SHOULD BE ROUTED AS 100 OHM DIFFERENTIALLY COUPLED OR SINGLE-ENDED 50 OHM TRANSMISSION LINES ON

OUTSIDE LAYERS. ROUTING DISTANCE SHOULD BE 5 INCHES OR LESS. ALL OTHER DATA LINES SHOULD BE 50 OHM IMPEDIANCE ON

INTERNAL OR EXTERNAL LAYERS. ROUTED POWER SHOULD BE A MINIMUM OF 40 MILS WIDE.

4. USE FR4-370 MATERIAL FOR ALL LAYERS.

5. SERIAL AND REFCLK NETS MUST MATCH WITHIN +/- 0.5 MILS

6. MATCH DIFFERENTIAL TRACE WIDTHS OF SERIAL AND REFCLK LINES WITH SMP/SMA PADS.

7. PLACE TI LOGO, BOARD NAME, JN COMBO LOGO, AND THE BOARD NUMBER IN TOP SIDE METAL.

TLK10034 EVM SMA Breakout Board Schematics

www.ti.com

13 TLK10034 EVM SMA Breakout Board Schematics

Figure 36. TLK10034 EVM SMA Breakout Board Schematic, Sheet 1 Cover Page and Index

TLK10034 Quad-Channel XAUI/10GBASE-KR Transceiver Evaluation Module SLLU168–August 2012

(EVM)

Submit Documentation Feedback