Datasheet
TLE2141-Q1
SLOS525 –SEPTEMBER 2011
www.ti.com
ABSOLUTE MAXIMUM RATINGS
(1)
over operating free-air temperature range (unless otherwise noted)
VALUE UNIT
V
CC+
Supply voltage
(2)
22 V
V
CC–
Supply voltage –22 V
V
ID
Differential input voltage
(3)
±44 V
V
I
Input voltage range (any input) V
CC+
to (V
CC–
– 0.3) V
I
I
Input current (each input) ±1 mA
I
O
Output current ±80 mA
Total current into V
CC+
80 mA
Total current out of V
CC–
80 mA
Duration of short-circuit current at (or below) 25°C
(4)
Unlimited
θ
JA
Package thermal impedance
(5) (6)
D package (8 pin) 97.1 °C/W
T
A
Operating free-air temperature range –40 to 125 °C
T
stg
Storage temperature range –65 to 150 °C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds 260 °C
(1) Stresses beyond those listed under “absolute maximum ratings” may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under “recommended operating
conditions” is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values, except differential voltages, are with respect to the midpoint between V
CC+
and V
CC–
.
(3) Differential voltages are at IN+ with respect to IN–. Excessive current flows, if input, are brought below V
CC–
– 0.3 V.
(4) The output may be shorted to either supply. Temperature and/or supply voltages must be limited to ensure that the maximum dissipation
rating is not exceeded.
(5) Maximum power dissipation is a function of T
J
(max), θ
JA
, and T
A
. The maximum allowable power dissipation at any allowable ambient
temperature is P
D
= (T
J
(max) – T
A
)/θ
JA
. Operating at the absolute maximum T
J
of 150°C can affect reliability.
(6) The package thermal impedance is calculated in accordance with JESD 51-7.
RECOMMENDED OPERATING CONDITIONS
MIN MAX UNIT
V
CC±
Supply voltage ±2 ±22 V
V
CC
= 5 V 0 2.7
V
IC
Common-mode input voltage V
V
CC±
= ±15 V –15 12.7
T
A
Operating free-air temperature –40 125 °C
4 Submit Documentation Feedback Copyright © 2011, Texas Instruments Incorporated