Datasheet
ABSOLUTE MAXIMUM RATINGS
(1)
RECOMMENDED OPERATING CONDITIONS
TLE2141-EP
TLE2142-EP
TLE2144-EP
SLOS577 – MAY 2008 ........................................................................................................................................................................................................
www.ti.com
over operating free-air temperature range (unless otherwise noted)
V
CC+
Supply voltage
(2)
22 V
V
CC –
Supply voltage – 22 V
V
ID
Differential input voltage
(3)
± 44 V
V
I
Input voltage range (any input) V
CC+
V to (V
CC –
– 0.3) V
I
I
Input current (each input) ± 1 mA
I
O
Output current ± 80 mA
Total current into V
CC+
80 mA
Total current out of V
CC –
80 mA
Duration of short-circuit current at (or below) 25 ° C
(4)
Unlimited
D package 97.1 ° C/W
θ
JA
Package thermal impedance
(5) (6)
DW package 57.3 ° C/W
T
A
Operating free-air temperature range – 55 ° C to 125 ° C
T
stg
Storage temperature range
(7)
– 65 ° C to 150 ° C
Lead temperature 1,6 mm (1/16 inch) from case for 10 seconds 260 ° C
(1) Stresses beyond those listed under absolute maximum ratings may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under recommended operating
conditions is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values, except differential voltages, are with respect to the midpoint between V
CC+
and V
CC –
.
(3) Differential voltages are at IN+ with respect to IN – . Excessive current flows, if input, are brought below V
CC –
– 0.3 V.
(4) The output may be shorted to either supply. Temperature and/or supply voltages must be limited to ensure that the maximum dissipation
rating is not exceeded.
(5) Maximum power dissipation is a function of T
J
(max), θ
JA
, and T
A
. The maximum allowable power dissipation at any allowable ambient
temperature is P
D
= (T
J
(max) – T
A
)/ θ
JA
. Operating at the absolute maximum T
J
of 150 ° C can affect reliability.
(6) The package thermal impedance is calculated in accordance with JESD 51-7.
(7) Long-term high temperature storage and/or extended use at maximum recommended operating conditions may result in a reduction of
overall device life. See http://www.ti.com/ep_quality for additional information on enhanced product packaging.
MIN MAX UNIT
V
CC ±
Supply voltage ± 2 ± 22 V
V
CC
= 5 V 0 2.7
V
IC
Common-mode input voltage V
V
CC ±
= ± 15 V – 15 12.7
T
A
Operating free-air temperature – 55 125 ° C
4 Submit Documentation Feedback Copyright © 2008, Texas Instruments Incorporated
Product Folder Link(s): TLE2141-EP TLE2142-EP TLE2144-EP