Datasheet

Part Descriptions
3-7
Physical Description
3.3 Part Descriptions
Table 3–1 lists and describes the EVM parts. C2 and E9 are not used.
Table 3–1.Part Descriptions
Quantity Reference Description
11 C4, C7, C11 C13, C15, C16,
C17, C20, C23, C25, C26
0.1 µF capacitor, 50 V, 10%, COG, SMD, size 1206
13 C1, C3, C6, C8–C10, C12,
C18, C19, C21, C22, C24, C27
4.7 µF capacitor, tantalum electrolytic, SMD, size A
1 C5
†
68 pF capacitor, 50 V, 5%, NPO, SMD, size 1210
1 C14 100 pF (TLC5540)/150 pF(TLC5510/TLC5510A) capacitor,
50 V, 5%, NPO, SMD, size 0805
3 FB1–FB5
†
Ferrite bead, SMD, size 1206, Murata BLM31B601SPT
2 J1, J4 Connector, BNC, 50 Ω, vertical, PC mount
3 J2, J3, J8 Screw terminal, 2 pin, vertical
1 J5 Header, 2 12, 0.025 inch square pins, 0.1 inch centers
4 J6, (E15, E16), (E17, E18),
(E19, E20)
Header, 1 2, 0.025 inch square pins, 0.1 inch centers
4 R1, R4, R5, R7 Resistor, 49.9 Ω, 1/8 W, 1 %, SMD, size 0805
1 R2 Potentiometer, 10 kΩ, multiturn SMD
1 R3 Resistor, 20 Ω, 1/4 W, SMD, size 1210
2 R6, R8 Resistor, 750 Ω, 1/10 W, 1 %, SMD, size 0805
1 R9 Resistor, 15K, 1/10 W, 1%, SMD, size 1210
1 R10 Resistor, 22 Ω, 1/10 W, 5%, SMD, size 0805
2 R11, R12 Resistor, 1 kΩ, 1/10 W, 5 %, SMD, size 0805
1 R13 Resistor pack, 22 Ω 8, 1/8 W, 5%, SMD, SOIC-16
1 R14 Resistor, 24.9K, 1/10 W, 1%, SMD, size 1210
1 R15
†
Resistor, 10 Ω, 1/10 W, 1%, SMD, size 1210
2 TP1, TP2 Test point terminal
4 P6, (P15, P16), (P17, P18),
(P19, P20)
Jumper, for 0.025 inch, square pins, 0.1 inch centers
1 U1 IC, (SN)74AC11004DW inverter, SOIC-16
1 U2 IC, THS3001CD operational amplifier, SOIC-8
1 U3 IC, TLC5540INSLE/TLC5510INSLE/TLC5510AINSLE
1 U4 IC, SN74AC573DW octal transparent latch, SOIC-20
1 U5 IC, TL431AID or TLV431AIDBV5, SOIC–8, SOT–23
1 PCB1 PCB, TLC5540/TLC5510/TLC5510A
†
C5, FB5 and R15 not on REV C PCB