Datasheet

TL750M SERIES
www.ti.com ............................................................................................................................................. SLVS021M –JANUARY 1988–REVISED OCTOBER 2009
ABSOLUTE MAXIMUM RATINGS
(1)
over virtual junction temperature range (unless otherwise noted)
MIN MAX UNIT
Continuous input voltage 26 V
Transient input voltage (see Figure 3) 60 V
Continuous reverse input voltage –15 V
Transient reverse input voltage t = 100 ms –50 V
KCS package 22
θ
JA
Package thermal impedance
(2) (3)
KTT package 25.3 °C/W
KVU package 28
T
J
Virtual-junction temperature range 0 150 °C
Lead temperature 1,6 mm (1/16 in) from case for 10 s 260 °C
T
stg
Storage temperature range –65 150 °C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) Maximum power dissipation is a function of T
J
(max), θ
JA
, and T
A
. The maximum allowable power dissipation at any allowable ambient
temperature is P
D
= (T
J
(max) – T
A
)/θ
JA
. Operating at the absolute maximum T
J
of 150°C can affect reliability. Due to variation in
individual device electrical characteristics and thermal resistance, the built-in thermal-overload protection may be activated at power
levels slightly above or below the rated dissipation.
(3) The package thermal impedance is calculated in accordance with JESD 51.
RECOMMENDED OPERATING CONDITIONS
MIN MAX UNIT
TL750M05 6 26
TL750M08 9 26
V
I
Input voltage V
TL750M10 11 26
TL750M12 13 26
I
O
Output current 750 mA
T
J
Operating virtual-junction temperature 0 125 °C
Copyright © 1988–2009, Texas Instruments Incorporated Submit Documentation Feedback 3