Datasheet

Bill of Material
1-7
Hardware
1.5 Bill of Material
Table 1–1 lists materials required for the SLVP097.
Table 1–1.Bill of Materials
Reference Part Number Mfr Description
C1 20SA100M Sanyo Capacitor, Os-Con, 100 F, 20 V, F-case
C2 Capacitor, Ceramic, 0.1 F, 50 V, 1206
C3 Capacitor, Ceramic, 0.1 F, 50 V, 1206
C4 Capacitor, Ceramic, 1000 pF, 50 V, 1206
C5 10SA220M Sanyo Capacitor, Os-Con, 220 F, 10 V, F-case
C6
*
10SA220M Sanyo Capacitor, Os-Con, 220 F, 10 V, F-case
C7 Capacitor, Ceramic, 0.1 F, 50 V, 1206
C8 Capacitor, Ceramic, 0.1 F, 50 V, 1206
C9 Capacitor, Ceramic, 0.1 F, 50 V, 1206
C10 ECS-T1EY105R Digikey Capacitor, Tantalum, 1.0 F, 25 V, 1206
C11 Capacitor, Ceramic, 1000 pF, 50 V, 1206
C12 Capacitor, Ceramic, 0.047 F, 50 V, 1206
C13 Capacitor, Ceramic, 0.018 F, 50 V, 1206
CR1 30WQ04FN IR Diode, Schottky, 3.3 A, 40 V, D-Pak
J1 Header, 4-pin, 0.025” sq 0.100” centers
J2 Header, 4-pin, 0.025” sq 0.100” centers
JP1 Header, 3-pin, 0.025” sq 0.100” centers
L1 SLF12565-330M2R8 TDK Inductor, 33 H, 2.8 A, 0.041 , 0.50” square
Q1 IRF7406 MOSFET, P-Ch, 30 V, 0.045 , 4.7 A, SO-8
R1 Resistor, CF, 22 , 1/10 W, 5%, 1206
R2 Resistor, CF, 47 k , 1/10 W, 5%, 0805
R3 Resistor, MF, 30.1 k , 1/10 W, 1%, 0805
R4 Resistor, CF, 1.8 k , 1/10 W, 5%, 0805
R5 Resistor, CF, 330 , 1/10 W, 5%, 0805
R6 Resistor, MF, 4.02 k , 1/10 W, 1%, 0805
R7 Resistor, MF, 1.00 k , 1/10 W, 1%, 0805
R8 Resistor, MF, 732 , 1/10 W, 1%, 0805
R8A
*
CT9W102-ND Digikey Potentiometer, 1 k , 10%, 18-turn, 9mm-
square
U1 TPS2817DBV TI MOSFET driver, noninverting, single channel,
SOT-25
U2 TL5001CD TI PWM controller, SO-8
–– Shunt, standard profile
––
SLVP097 TI PCB, TPS2817 EVM, 2.40” 1.60”
* Optional parts not on present board.