Datasheet
The TL087, TL088, and TL287 are
obsolete and are no longer supplied.
TL087, TL088, TL287, TL288
JFET-INPUT OPERATIONAL AMPLIFIERS
SLOS082B – MARCH 1979 REVISED – JULY 2004
2
POST OFFICE BOX 655303 • DALLAS, TEXAS 75265
symbol (each amplifier)
+
−
OUT
IN +
IN −
absolute maximum ratings over operating free-air temperature range (unless otherwise noted)
TL088M
TL288M
TL087I
TL088I
TL287I
TL288I
TL087C
TL088C
TL287C
TL288C
UNIT
Supply voltage, VCC+ (see Note 1) 18 18 18 V
Supply voltage, V
CC
− (see Note 1) −18 −18 −18 V
Differential input voltage (see Note 2)
±30 ±30 ±30
V
Input voltage (see Notes 1 and 3)
±15 ±15 ±15
V
Input current, I
I
(each Input) ±1 ±1
±1 mA
Output current, I
O
(each output) ±80 ±80 ±80 mA
Total V
CC
+ terminal current 160 160 160 mA
Total V
CC
− terminal current −160 −160 −160 mA
Duration of output short circuit (see Note 4) Unlimited Unlimited Unlimited
Continuous total dissipation See Dissipation Rating Table
Maximum junction temperature, T
J
150 150 °C
Package thermal impedance, q
JA
(see Notes 5 and 6)
P package 85 85 °C/W
Lead temperature 1,6 mm (1/16 inch) from case for 60
seconds
JG or U package 300 300 300 °C
Storage temperature range, T
stg
−65 to 150 −65 to 150 −65 to 150 °C
NOTES: 1. All voltage values, except differential voltages, are with respect to the midpoint between V
CC+
and V
CC−
.
2. Differential voltages are at the noninverting input terminal with respect to the inverting input terminal.
3. The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 V, whichever is less.
4. The output may be shorted to ground or to either supply. Temperature and/or supply voltages must be limited to ensure that the
dissipation rating is not exceeded.
5. Maximum power dissipation is a function of T
J
(max), q
JA
, and T
A
. The maximum allowable power dissipation at any allowable ambient
temperature is PD = (T
J
(max) – T
A
)/q
JA
. Operating at the absolute maximum T
J
of 150°C can affect reliability.
6. The package thermal impedance is calculated in accordance with JESD 51-7.
7. The output may be shorted to ground or to either supply. Temperature and/or supply voltages must be limited to ensure that the
dissipation rating is not exceeded.
8. Maximum power dissipation is a function of T
J
(max), q
JA
, and T
A
. The maximum allowable power dissipation at any allowable ambient
temperature is PD = (T
J
(max) – T
A
)/q
JA
. Operating at the absolute maximum T
J
of 150°C can affect reliability.
9. The package thermal impedance is calculated in accordance with JESD 51-7.
DISSIPATION RATING TABLE
PACKAGE
T
A
≤ 25°C
POWER RATING
DERATING FACTOR
ABOVE T
A
=
25°C
T
A
= 70°C
POWER RATING
T
A
= 85°C
POWER RATING
T
A
= 125°C
POWER RATING
JG 1050 mW 8.4 mW/°C 672 mW 546 mW 210 mW
U 675 mW 5.4 mW/°C 432 mW 351 mW 135 mW