Datasheet

FIFO Empty

TXRDY

wrptr

TXRDY

wrptr

At Least One

Location Filled

FIFO Empty

RXRDY

rdptr

RXRDY

rdptr

At Least One

Location Filled

0000

LSR

IER

THR RHR

IOW/IOR

Processor

TL16C752B-EP

SGLS153B –FEBRUARY 2003–REVISED DECEMBER 2007

www.ti.com

Polled Mode Operation

In polled mode (IER[3:0]=0000) the status of the receiver and transmitter can be checked by polling the line

status register (LSR). This mode is an alternative to the FIFO interrupt mode of operation where the status of the

receiver and transmitter is automatically known by means of interrupts sent to the CPU. Figure 6 shows FIFO

polled mode operation.

Figure 6. FIFO Polled Mode Operation

DMA Signalling

There are two modes of DMA operation: DMA mode 0 or 1, selected by FCR[3].

In DMA mode 0 or FIFO disable (FCR[0]=0) DMA occurs in single character transfers. In DMA mode 1 multi-

character (or block) DMA transfers are managed to relieve the processor for longer periods of time.

Single DMA Transfers (DMA Mode0/FIFO Disable)

Transmitter: When empty, the TXRDY signal becomes active. TXRDY goes inactive after one character has

been loaded into it.

Receiver: RXRDY is active when there is at least one character in the FIFO. It becomes inactive when the

receiver is empty.

Figure 7 shows TXRDY and RXRDY in DMA mode0/FIFO disable.

Figure 7. TXRDY and RXRDY in DMA Mode 0/FIFO Disable

Product Folder Links: TL16C752B-EP