Datasheet
www.ti.com
ABSOLUTE MAXIMUM RATINGS
(1)
TL082-Q1
JFET-INPUT OPERATIONAL AMPLIFIER
SLOS548 – SEPTEMBER 2007
over operating free-air temperature range (unless otherwise noted)
VALUE
V
CC+
Supply voltage, positive
(2)
18 V
V
CC –
Supply voltage, negative
(2)
– 18 V
V
ID
Differential input voltage
(3)
± 30 V
V
I
Input voltage
(2) (4)
± 15 V
Duration of output short circuit
(5)
Unlimited
Continuous total power dissipation
(6)
TL082I – 40 ° C to 85 ° C
T
A
Operating free-air temperature range
TL082Q – 40 ° C to 125 ° C
θ
JA
Package thermal impedance, junction to free air
(7)
97 ° C/W
Human-Body Model 1.5 kV (H1C)
ESD rating
(8)
Charged-Device Model 1.5 kV (C5)
Machine Model 200 V (M3)
Operating virtual junction temperature 150 ° C
T
stg
Storage temperature range – 65 ° C to 150 ° C
(1) Stresses beyond those listed under "absolute maximum ratings" may cause permanent damage to the device. These are stress ratings
only, and functional operation of the device at these or any other conditions beyond those indicated under "recommended operating
conditions" is not implied. Exposure to absolute-maximum-rated conditions for extended periods may affect device reliability.
(2) All voltage values, except differential voltages, are with respect to the midpoint between V
CC+
and V
CC –
.
(3) Differential voltages are at IN+ with respect to IN – .
(4) The magnitude of the input voltage must never exceed the magnitude of the supply voltage or 15 V, whichever is less.
(5) The output may be shorted to ground or to either supply. Temperature and/or supply voltages must be limited to ensure that the
dissipation rating is not exceeded.
(6) Maximum power dissipation is a function of T
J
(max), θ
JA
, and T
A
. The maximum allowable power dissipation at any allowable ambient
temperature is PD = (T
J
(max) – T
A
)/ θ
JA
. Operating at the absolute maximum T
J
of 150 ° C can affect reliability.
(7) The package thermal impedance is calculated in accordance with JESD 51-7.
(8) ESD protection level per JEDEC classifications JESD22-A114 (HBM), JESD22-A115 (MM), and JESD22-C101 (CDM).
Copyright © 2007, Texas Instruments Incorporated Submit Documentation Feedback 3