Application Guide

9. Disconnect the unit.
Depending on the device, LED lights may indicate its status.
Red. The system is not ready.
Amber. The system is ready but not collecting data.
Green. The system is collecting data.
10. If you are starting collection manually, press the trigger when ready. If you are
starting based on a delay, the collection will start automatically when the
countdown is complete.
Retrieving the Remote Data
After collecting data remotely, you transfer it to the computer or handheld for analysis.
1. Open the Vernier DataQuest™ application.
2. Attach the TI-Nspire™ Lab Cradle to the handheld or computer.
The Remote Data Detected dialog box opens.
3. Click Import.
The data transfers to the Vernier DataQuest™ application.
Setting Up a Sensor for Automatic Triggering
To start data collection automatically based on a specific sensor reading, the
TI-Nspire™ Lab Cradle and sensor must be connected.
Data Collection 435