User Guide
Table Of Contents
- Setting up the TI‑Nspire™ Navigator™ Teacher Software
- About the Hardware
- Before You Begin
- Charging the Cradles
- Updating the Handheld Operating System
- Connecting the TI‑Nspire™ Navigator™ Access Point
- Confirming Handheld OS Version
- Naming the Class Network
- Adding Wireless Clients to the Network
- Connecting the Handhelds to the Wireless Adapters
- Connecting the Handhelds to Cradles
- Creating and Managing Your Teacher Account
- Logging In to the TI‑Nspire™ Navigator™ System from the Handheld
- Storing the Wireless Adapters and Cradles
- Using TI‑Nspire™ Network Manager
- USA FCC Information Concerning Radio Frequency Interference
- Canadian IC Information
- Mexico - Declaration of Conformity
- European Union and EFTA Regulatory Compliance
- China SRRC CMIIT Identification
- Warning Statements
- Important for Safe AC Adapter Operation
8 Setting up the TI-Nspire™ Navigator™ Teacher Software
- The Add OS Transfer List closes.
- The Start Up dialog box is displayed.
4. Select the All my handhelds are updated to version 3.6 check box.
5. Click Next.
The ConnectAccess Point dialog box opens.
Connecting the TI-Nspire™ Navigator™ Access Point
When the operating system update on all handhelds is complete, the next step
in the system startup process is to connect the access point. When you connect
the access point to your computer, it is powered on and ready to communicate
with wireless network adapters and cradles.
1. Connect the access point to the computer using a USB cable.
a) Connect the small end of the USB cable to the access point.
Connect the access point directly to your computer. Do not connect
the access point to a USB hub or docking station.
b) Connect the other end of the cable to the USB port on your computer.
c) Make sure the access point power light is on. The power light
indicates that the access point is receiving power from the computer.
The signal light indicates wireless link activity.
DRAFT