User Guide
Table Of Contents
- Setting up the TI‑Nspire™ Navigator™ Teacher Software
- About the Hardware
- Before You Begin
- Charging the Cradles
- Updating the Handheld Operating System
- Connecting the TI‑Nspire™ Navigator™ Access Point
- Confirming Handheld OS Version
- Naming the Class Network
- Adding Wireless Clients to the Network
- Connecting the Handhelds to the Wireless Adapters
- Connecting the Handhelds to Cradles
- Creating and Managing Your Teacher Account
- Logging In to the TI‑Nspire™ Navigator™ System from the Handheld
- Storing the Wireless Adapters and Cradles
- Using TI‑Nspire™ Network Manager
- USA FCC Information Concerning Radio Frequency Interference
- Canadian IC Information
- Mexico - Declaration of Conformity
- European Union and EFTA Regulatory Compliance
- China SRRC CMIIT Identification
- Warning Statements
- Important for Safe AC Adapter Operation
You must connect handhelds using a USB cable or connect multiple
handhelds using TI-Nspire™ docking stations.
3. Click Detect handheld OS.
• If the OS for all connected handhelds matches the software version,
the Handheld OS Update dialog box is displayed informing you that
all handhelds are up to date. Click Close to return to the Startup dialog
box.
• If the OS on the connected handhelds is not current, the Handheld
OSUpdate Required dialog box is displayed. Click Update OS.
The Add to Transfer List dialog box opens.
The matching OSfiles are transferred to the connected handhelds.
You can update TI-Nspire™ CX handhelds and TI-Nspire™ handhelds
at the same time. If you cannot connect all handhelds at one time,
connect as many as possible and update the OS. After the OS update
is complete, disconnect the handhelds and repeat the OS update
process until all handhelds are updated. The software will detect the
OS needed and begin the transfer as you connect the handhelds.
• Click Done to stop the transfer process when all handhelds are
updated.
Setting up the TI-Nspire™ Navigator™ Teacher Software 7
DRAFT