User Guide

36 Setting up the TI-Nspire™ Navigator™ Teacher Software
wireless client, press and hold the Shift or Ctrl key (Mac®:“ key), and
click the items you want to select.
2. Click Actions > Identify Selected.
3. Look around your classroom.
• If you are using cradles, both LEDs on the cradles that you selected
will blink rapidly with a green color.
• If you are using a docking station, both LEDs on the docking station
will blink rapidly with a green color.
You can identify the wireless clients that are not working because their
LEDs are not blinking.
Now that you know where the non-working wireless clients are, you can add
them to the network again.
Removing Wireless Clients
To remove adapters or cradles from the class network, complete the following
steps.
1. In the TI-Nspire™ Network Manager window, select the wireless adapters
and cradles that you want to remove from the network.
2. Click Actions > Removed Selected, or click .
3. When prompted, click Remove.
The selected wireless clients are removed from the list.
Resetting the Access Point to Factory Default Settings
1. In the TI-Nspire™ Network Manager window, click Actions > Set Default
Factory Settings to Access Point.
The access point is reconfigured to the default factory settings.
2. Click OKwhen the confirmation message is displayed.
DRAFT