User Guide

Important! If you are using the TI-Nspire™ CX Navigator™ network adapter
– v2 adapters, you can select either the 2.4GHz or 5GHz band. If you have
a mixture of wireless network adapters, you must select the 2.4GHz band.
2. Select a different channel from the drop-down box.
3. Click Done.
The Configuring the Access Point dialog box opens and the software
configures the access point.
Saving a Network Setup
Saving a network setup enables you to reload the configuration at a later time
using the TI-Nspire™ Network Manager. The saved network information
includes the list of wireless client IDs, the network name, and the channel and
country selected on the access point. By default, the file is saved in the My
Documents/TI-Nspire/Navigator Network folder.
1. In the TI-Nspire™ Network Manager window, click Actions >Save Network
Setup.
The Save dialog box opens.
2. Name the network and then click Save. You can save the file to another
location, if desired.
Reusing a Saved Network
Reusing a saved network enables you to reload the configuration of a saved
network. Reusing a network can save time because you do not have to set up
the network again.
1. In the TI-Nspire™ Network Manager window, click Actions >Apply Saved
Network Setup.
The Apply a Network dialog box opens.
2. Select the network and then click Apply a Network.
3. The access point is configured with the saved network configuration.
Identifying Wireless Clients
To identify wireless clients that are not responding, complete the following
steps.
1. From the list of hardware components in the TI-Nspire™ Network Manager
window, click to select the wireless clients. To select more than one
Setting up the TI-Nspire™ Navigator™ Teacher Software 35
DRAFT