User Guide
Table Of Contents
- Setting up the TI‑Nspire™ Navigator™ Teacher Software
- About the Hardware
- Before You Begin
- Charging the Cradles
- Updating the Handheld Operating System
- Connecting the TI‑Nspire™ Navigator™ Access Point
- Confirming Handheld OS Version
- Naming the Class Network
- Adding Wireless Clients to the Network
- Connecting the Handhelds to the Wireless Adapters
- Connecting the Handhelds to Cradles
- Creating and Managing Your Teacher Account
- Logging In to the TI‑Nspire™ Navigator™ System from the Handheld
- Storing the Wireless Adapters and Cradles
- Using TI‑Nspire™ Network Manager
- USA FCC Information Concerning Radio Frequency Interference
- Canadian IC Information
- Mexico - Declaration of Conformity
- European Union and EFTA Regulatory Compliance
- China SRRC CMIIT Identification
- Warning Statements
- Important for Safe AC Adapter Operation
2. For each wireless adapter or cradle you are adding, find the ID number on
the back of the adapter or cradle, and type it in the Wireless Client ID box.
The ID is the last six digits of the eight-digit number (ignore the first two
zeros).
3. Enter a nickname in the Wireless Client Nickname box (optional).
Nicknames can consist of letters, spaces, and numbers. A nickname must
contain a minimum of 1 character and can contain a maximum of 64
characters.
4. Click Add Next to add another adapter or cradle if you have more than one
wireless client to add.
5. When you are finished adding all the adapters and cradles, click Finish.
After you manually add wireless clients, you need to associate them to the
network using the handhelds.
6. Turn on each TI-Nspire™ handheld.
7. Attach the wireless adapter or the wireless cradle to each handheld. (See
the instructions for connecting wireless adapters or cradles to a TI-Nspire™
handheld.)
8. From the Home screen of the TI-Nspire™ handheld, select 5:Settings>
6:Network.
The handheld lists the available networks that are within range.
Setting up the TI-Nspire™ Navigator™ Teacher Software 33
DRAFT