User Guide
Table Of Contents
- Setting up the TI‑Nspire™ Navigator™ Teacher Software
- About the Hardware
- Before You Begin
- Charging the Cradles
- Updating the Handheld Operating System
- Connecting the TI‑Nspire™ Navigator™ Access Point
- Confirming Handheld OS Version
- Naming the Class Network
- Adding Wireless Clients to the Network
- Connecting the Handhelds to the Wireless Adapters
- Connecting the Handhelds to Cradles
- Creating and Managing Your Teacher Account
- Logging In to the TI‑Nspire™ Navigator™ System from the Handheld
- Storing the Wireless Adapters and Cradles
- Using TI‑Nspire™ Network Manager
- USA FCC Information Concerning Radio Frequency Interference
- Canadian IC Information
- Mexico - Declaration of Conformity
- European Union and EFTA Regulatory Compliance
- China SRRC CMIIT Identification
- Warning Statements
- Important for Safe AC Adapter Operation
32 Setting up the TI-Nspire™ Navigator™ Teacher Software
Color
and
pattern
Meaning
Solid
amber
The battery is charging.
Solid
green
Power on; charged and powered by a charging bay or power
adapter.
Solid
red
The battery is charging, but does not have good contact with the
charging bay. Reposition the cradle so it has good contact. The
LED should then turn amber to indicate it is recharging.
Outside the charging bay
Blinking
green
Power on; battery powered. The battery is 30% to 99% charged.
Blinking
amber
Low battery (less than 30% charged).
Blinking
red
Battery is critically low (less than 8% charged).
Manually Adding Wireless Clients
You can manually add wireless adapters or wireless cradles at any time.
When you add a wireless adapter or cradle manually, it immediately appears in
the TI-Nspire™ Network Manager window.
1. In the TI-Nspire™ Network Manager window, click Manually Add Wireless
Client(s).
The Add Wireless Clients by ID Number dialog box opens.
DRAFT