User Guide

After you have set up the network, all of the adapters or cradles you added
appear in the TI-Nspire™ Network Manager window. If the wireless adapter or
cradle is charged and attached to a TI-Nspire™ handheld that is powered on,
TI-Nspire™ Network Manager shows the status as connected. It may take up to
30 seconds to recognize the wireless client and show its status as connected.
The status window also displays the battery status and signal strength.
If the cradle is not charged, or the adapter or cradle is not connected to a
TI-Nspire™ handheld that is powered on, TI-Nspire™ Network Manager displays
the status as disconnected. TI-Nspire™ Network Manager remembers the
adapter and cradle IDs you added, and the next time you turn on a handheld
that is connected to the adapter or cradle, TI-Nspire™ Network Manager
recognizes it.
Cradle LEDs
The LEDs on each TI-Nspire™ Navigator™ wireless cradle use various colors
and blink patterns to indicate data activity or power status. This can occur either
when the cradles are seated in the charging bay or when they are outside the
charging bay.
The LEDs indicate status as follows.
Activity LED
Color and pattern Meaning
Blinking green Indicates data transfer to and from the access point.
Battery (Power Status) LED
Color
and
pattern
Meaning
In the charging bay
Setting up the TI-Nspire™ Navigator™ Teacher Software 31
DRAFT