User Guide
Table Of Contents
- Setting up the TI‑Nspire™ Navigator™ Teacher Software
- About the Hardware
- Before You Begin
- Charging the Cradles
- Updating the Handheld Operating System
- Connecting the TI‑Nspire™ Navigator™ Access Point
- Confirming Handheld OS Version
- Naming the Class Network
- Adding Wireless Clients to the Network
- Connecting the Handhelds to the Wireless Adapters
- Connecting the Handhelds to Cradles
- Creating and Managing Your Teacher Account
- Logging In to the TI‑Nspire™ Navigator™ System from the Handheld
- Storing the Wireless Adapters and Cradles
- Using TI‑Nspire™ Network Manager
- USA FCC Information Concerning Radio Frequency Interference
- Canadian IC Information
- Mexico - Declaration of Conformity
- European Union and EFTA Regulatory Compliance
- China SRRC CMIIT Identification
- Warning Statements
- Important for Safe AC Adapter Operation
30 Setting up the TI-Nspire™ Navigator™ Teacher Software
• Update all student and classroom handhelds to the latest operating
system (OS)version. The OS on the handhelds must match the
software version installed on your computer.
• Connect the access point and, if needed, update the access point
firmware.
• Name the class network.
• If required, select a channel for the access point.
• Add wireless clients to your network.
• Create a backup copy of the class network configuration.
Checking Network Status
The network status is shown in the side bar of TI-Nspire™ Network Manager
window.
Note:If the sidebar is hidden, click View >Sidebar. Click Refresh to update the
status if the Network Manager is already open.
The network status shows the following information:
• Access Point. Shows whether the AP is connected or disconnected.
• Network Name. The name you gave the network when you set it up.
• Channel. The access point operating channel for the current network.
• Band. The selected communication link.
• Firmware. The version of the access point.
• MAC Address. The Media Access Control address that identifies the access
point.
DRAFT