User's Manual

12 Installing the TI-Nspire™ Navigator™ software
You are now ready to set up your network.
Setting up your TI-Nspire™ Navigator™ network
the first time
A Network Setup wizard helps you activate the access point and wireless
cradles for wireless communication.
If you have not used the TI-Nspire™ Navigator™ software before, a
prompt opens asking if you want to set up your classroom. You can
choose to set up your classroom or continue on to the TI-Nspire™
Navigator™ computer home screen.
If you have used Connect-to-Class™ software and have class data, a
prompt opens asking if you want to import the data. Click
Yes to import
the data. You can skip this step and import the data later by clicking
File > Import Class Data. You may have to restart the software for the
changes to take effect.
Before you begin
1. Make sure you have installed and activated the TI-Nspire™
Navigator™ software on your computer.
2. Make sure each wireless cradle is charged ( LED is solid amber or
solid green).
Connecting the cables to the access point
1. Identify the cables.
2. Connect the AC9930 power adapter to the power jack on the access
point.
3. Connect the USB cable to the access point.
AC9930 Power adapter
USB cable
TI-Navigator_Help_PRINT.book Page 12 Tuesday, January 26, 2010 10:29 AM