User's Manual

152 Troubleshooting
Lost connections
Certain actions, such as resetting the access point, can cause the
TI-Nspire™ Navigator™ network to lose its connection to one or more
wireless cradles. This can occur even when TI-Nspire™ Network Manager
reports that the cradles are responding.
If you attempt to transfer data to or from handhelds, and some of the
wireless cradles do not respond (even though they are listed as “found”),
try to disconnect the TI-Nspire™ handheld from the offending cradle,
and then re-connect it.
You have a
conflict on the
operating
channel used by
your
TI-Navigator™
access point.
• A conflict could be caused if another access
point or a cordless telephone is using the
same channel.
• To try a different channel, open TI-Nspire™
Network Manager. Switch hardware types if
necessary. Click
Actions > Change Operating
Channel
. On the Operating Channel Selection
screen, in the Operating Channel list, click a
different channel number, and click
OK. If the
changing the channel doesn’t correct the
problem, try a different channel.
Problem or
message
Possible causes or solutions
TI-Navigator_Help_PRINT.book Page 152 Tuesday, January 26, 2010 10:29 AM