User's Manual

134 Managing the hardware
1. In the TI-Nspire™ Network Manager window, select the TI-Nspire™
Navigator™ wireless cradles that you want to remove from the
network.
Note: To select more than one cradle, hold down the
Shift key or
the
Ctrl key while clicking the cradles that you want to select.
2. Click
Actions > Remove Selected or click .
3. Click Remove at the prompt.
The cradle is no longer listed in the Network Manager window.
Battery information for wireless cradles
• You cannot damage the batteries by leaving them in the charging
bay beyond the time needed to fully charge them. Also, you will not
damage the wireless cradles by inserting or removing them from the
charging bay at any time.
• It is not necessary to unplug the power adapter from the charging
bay, even when no wireless cradles are present.
• To charge as many as five wireless cradles at a time, use the charging
bay. If you only need to charge one cradle, you can connect the
AC9926 power adapter (available in the individual kit) directly from
the cradle to a power outlet.
• It is not necessary to fully discharge the batteries before recharging
them.
• Do not leave the wireless cradles in an extremely cold or extremely
warm location, such as inside an automobile in hot weather.
• Every few weeks, you should clean the electrical contacts on the
charging bay and the wireless cradles using a clean, dry cloth.
Storing the wireless cradles
If you need to store the TI-Nspire™ Navigator™ wireless cradles for more
than two weeks, store the cradles in a cool, dry place.
Fully charge the cradles at least once every 10-12 months.
TI-Navigator_Help_PRINT.book Page 134 Tuesday, January 26, 2010 10:29 AM