User's Manual

6 Installing the TI-Nspire™ Navigator™ software
When the wireless cradles are still in the TI-Nspire™ Navigator™ cradle
charging bay:
• A solid amber LED means the wireless cradle is currently
recharging.
• A solid red LED means the wireless cradle is recharging but does
not have good contact with the charging bay. Reposition the cradle
so it has good contact. The LED should then turn amber to indicate it
is recharging.
• A solid green LED means the wireless cradle is fully charged.
Connecting the handhelds to the wireless cradles
After charging the TI-Nspire™ Navigator™ wireless cradles, you are
ready to connect the wireless cradles to the TI-Nspire™ or
TI-Nspire™ CAS handhelds.
1. Slide the lock on the back of the cradle to the OFF position.
2. To attach the handheld, face the screen upward and slide the
handheld onto the top of the TI-Nspire™ Navigator™ wireless
cradle. Be sure that both sides of the handheld are inserted into both
of the side guides
.
3. Press firmly to make a good connection. When properly connected,
the TI-Nspire™ handheld appears to be sitting on top of the cradle.
Lock in OFF position.
TI-Navigator_Help_PRINT.book Page 6 Tuesday, January 26, 2010 10:29 AM