User Manual

25
Messages
Problem or
message
Possible solutions
Device not
found
• Make sure the TI-Nspire™ handheld is
securely connected to the TI-Nspire™
Navigator™ wireless cradles.
• Ensure that the access point is connected and
its power adapter is plugged in.
• Right-click
My Computer on the Windows®
Desktop, and click
Properties. Under the
General tab, make sure your computer lists
Windows® Vista Ultimate, Home, Business, or
Pro; Windows® XP Professional with Service
Pack 1, 2, or 3; or Windows® 2000 with
Service Pack 4 installed.
Problem or
message
Possible causes or solutions
Device is
incorrectly
configured
An access point
was located, but
one or more
configuration
parameters are
set incorrectly.
Troubleshoot the Access Point procedure to
reconfigure this device. (See “Setting up your
TI-Nspire™ Navigator™ network the first time”
on page 11.)
Device did not
respond, or
Device not
found
No access point
was located by
the system. The
cradles cannot be
configured until
this is corrected.
• The access point has not yet been added to
the system.
• The access point is turned on but still
initializing.
• Run Network Manager and click on
Check
Access Point
.