User Manual
Table Of Contents
- Setting Up the TI-Nspire™ Navigator™ Teacher Software
- Unpacking the Boxes
- Charging the Cradles
- Installing the Handheld Software
- Setting Up a TI-Nspire™ Navigator™ Network the First Time
- Connecting the Handhelds to the Wireless Adapters
- Connecting the Handhelds to Cradles
- Storing the Wireless Adapters and Cradles
- Checking the Status of Wireless Adapters and Cradles
- Creating and Managing Your Teacher Account
- Logging In to the TI-Nspire™ Navigator™ System from the Handheld
- USA FCC Information Concerning Radio Frequency Interference
- Canadian IC Information
- Warning Statements
Setting Up the TI-Nspire™ Navigator™ Teacher Software 13
2. To attach the handheld, face the screen upward and slide the
handheld onto the top of the TI-Nspire™ Navigator™ wireless cradle.
Be sure that both sides of the handheld are inserted into both of the
side guides
.
3. Press firmly to make a good connection. When properly connected,
the TI-Nspire™ handheld appears to be sitting on top of the cradle.
4. Lock the handheld in place by sliding the lock on the back of the
cradle to the ON position.
5. Insert each cradle into the charging bay. Make sure the LED is amber.
Lock in OFF position.
Lock in ON position.