User Manual
Table Of Contents
- Setting Up the TI-Nspire™ Navigator™ Teacher Software
- Unpacking the Boxes
- Charging the Cradles
- Installing the Handheld Software
- Setting Up a TI-Nspire™ Navigator™ Network the First Time
- Connecting the Handhelds to the Wireless Adapters
- Connecting the Handhelds to Cradles
- Storing the Wireless Adapters and Cradles
- Checking the Status of Wireless Adapters and Cradles
- Creating and Managing Your Teacher Account
- Logging In to the TI-Nspire™ Navigator™ System from the Handheld
- USA FCC Information Concerning Radio Frequency Interference
- Canadian IC Information
- Warning Statements
10 Setting Up the TI-Nspire™ Navigator™ Teacher Software
To add all of the wireless clients listed in the Available Wireless Clients
column, click
Add All.
Note: If the adapter or cradle does not appear in the Available
Wireless Clients column after six minutes, try these tips:
• Check the ID numbers of the wireless adapters or cradles to see
which ones are not connecting.
• Detach and reattach the wireless adapter or wireless cradle to the
handheld.
• Verify that the cradle is locked. (The lock on the back of the cradle
is in the ON position.)
5. When all of the adapters and cradles are added, click Finish.
Adding Wireless Adapters or Cradles Manually
When you add a wireless adapter or cradle manually, it immediately
appears in the TI-Nspire™ Network Manager window.
1. Click
Manually Add Wireless Client(s).
The Add Wireless Clients by ID Number dialog box opens.
2. For each wireless adapter or cradle you are adding, find the ID
number on the back of the adapter or cradle, and type it in the
Wireless Client ID box. The ID is six digits.
3. Enter a nickname in the Wireless Client Nickname box (optional).
Wireless network adapter ID
Cradle ID