User Manual
Table Of Contents
- Important Information
- Using Your TI-84 Plus CE Graphing Calculator
- Using the Keyboard
- Setting Up the Calculator Modes
- Evaluating Expressions
- Working with Graphs
- Working with Matrices
- Working with Probability and Statistics
- Working with Variables
- Managing Calculator Files
- Using Applications (Apps)
- Using Accessories
- Using Press-to-Test
- Diagnosing and Correcting Error Conditions
- General Information
- Index
Preparing Charging Stations for Use
The TI Charging Station CE is shipped with the following components in each package:
• A TI Charging Station CE
• An AC adapter
• A regional power cord adapter
1. Insert the small end of the power adapter cord into the charging station’s power
jack.
2. Plug the other end of the adapter into a power outlet.
• An indentation on each side of the TI Charging Station CE enables you to lift it.
Always use two hands to lift and move the charging station.
• When the charging station is empty, turn it over and you will notice and indention
on the bottom. Thread the cable through this indention to ensure the charging
station sits flat on a surface.
• Place the charging station on a flat, stable surface. You can also use a wheeled cart
if you need to move the charging station between classrooms. When deciding on a
location, consider its proximity to a power source such as a power strip or wall
outlet.
Inserting Graphing Calculators into the TI Charging Station CE
The slots in the TI Charging Station CE are designed to accommodate a graphing
calculator without a slide case attached. The calculator will not fit in the slots with the
slide case attached.
The front of the calculator must face the front of the charging station. You may
damage the TI-84PlusCE graphing calculator if you try to force it into the charging
station facing the wrong direction. When looking at the TI logo on the charging station,
insert calculators into the slot with the keypad facing left.
Using Accessories 51