Operation Manual

Chapter 11: Lists 165
Naming Lists
Using TI-84 Plus C List Names L1 through L6
The TI-84 Plus C has six list names in memory: L1, L2, L3, L4, L5, and L6. The list names L1 through L6 are
the second functions of À through ¸. To paste one of these names to a valid screen, press y, and
then press the appropriate key. L1 through L6 are stored in stat list editor columns 1 through 6 when
you reset memory.
4. Press ¿, and then press y7 to turn on alpha-lock.
Press
[S] [E] [Q], and then press ƒ to turn off alpha-lock.
Press 1 to complete the list name.
Note: Since the seq( command creates a list, you can name
give the list a name up to five characters long.
5. Press Í to generate the list and store it in SEQ1. The list
is displayed on the home screen. Note: An ellipsis (
...) in
Classic mode indicates that the list continues beyond the
viewing window. Press ~ repeatedly (or press and hold ~) to
scroll the list and view all the list elements.
6. Press y 9 to display the LIST NAMES menu. Select SEQ1
from the list and press Í to paste SEQ1 to the current
cursor location.
7. Press  to display the
MATH menu. Press 2 to select
2:4Dec, which pastes 4Dec to the current cursor location.
8. Press Í to show the sequence in decimal form. Press ~
repeatedly (or press and hold ~) to scroll the list and view all
the list elements.
Note: You must scroll immediately after pressing Í.