Operation Manual

Chapter 9: Split Screen 144

TI-84 Plus C Pixels in Horizontal and Graph-Table Modes

Note: Each set of numbers in parentheses above represents the row and column of a corner pixel,

which is turned on.

DRAW POINTS Menu Pixel Instructions

See Chapter 8 “Draw Instructions” for more information.

DRAW Menu Text( Instruction

See Chapter 8 “Draw Instructions” for more information.

PRGM I/O Menu Output( Instruction

For the Output( instruction:

•In

Horizontal mode, row must be {4; column must be {26.

•In

Graph-Table mode, row must be {10; column must be {26.

Output(row,column,"text")

Note: The Output( instruction can only be used within a program.

Setting a Split-Screen Mode from the Home Screen or a Program

To set Horizontal or Graph-Table from a program, follow these steps.

1. Press z while the cursor is on a blank line in the program editor.

2. Select

Horizontal or Graph-Table.

The instruction is pasted to the cursor location. The mode is set when the instruction is encountered

during program execution. It remains in effect after execution.

Note: You also can paste

Horizontal or Graph-Table to the home screen or program editor from the

CATALOG (Chapter 15).

Graph Area Pixel Rows Pixel Columns

FULL 0-164 0-264

HORIZ 0-80 0-264

G-T 0-144 0-184