Operation Manual

Chapter 9: Split Screen 141
Using Split Screen
Setting a Split-Screen Mode
To set a split-screen mode, press z, and then move the cursor to Horizontal (Horiz) or Graph-Table
(G-T)
and press Í.
• Select
Horizontal to display the graph screen and another screen split horizontally.
• Select Graph-Table to display the graph screen and table screen split vertically.
Note: Classic mode is used in this example.
The split screen is activated when you press any key that applies to either half of the split screen.
If stat plots are turned on, the plots are shown along with the x-y plots in graphs. Press y 0 to
make the table portion of the split screen active and to display the list data. Press † or } to highlight a
value you want to edit, and then enter a new value directly in the table to overwrite the previous value.
Press ~ repeatedly to display each column of data (both table and list data).
Split-screen display with both x-y plots and stat plots
7. Press y 0 to make the table portion of the split
screen active.
$$