manual

C
© 2007 TEXAS INSTRUMENTS INCORPORATED TI-34 MultiView: A Guide For Teachers C-1
Error messages
When the TI-34 MultiView™ calculator detects an error, it returns an error message with the type of
error.
To correct the error, note the error type and and determine the cause of the error. If you cannot
recognize the error, use the following list, which describes error messages in detail.
Press - to clear the error message. The previous screen is displayed with the cursor at or near
the error location. Correct the expression.
MESSAGE MEANING
ARGUMENT A function does not have the correct number of arguments.
DIVIDE BY 0 You attempted to divide by 0.
DOMAIN You specified an argument to a function outside the valid range. For
example:
For
x
Ñy: x = 0 or (y < 0 and x is not an odd integer).
For Ñx: x < 0.
For LOG or LN: x  0.
For TAN: x = 90Ä, M90Ä, 270Ä, M270Ä, 450Ä, etc.
For SIN
-1
or COS
-1
: |x| > 1.
For nCr or nPr: n or r < 0.
EQUATION LENGTH
ERROR
An entry exceeds the digit limits (88 for entry line and 47 for statistics
or stored operation entry lines); for example, combining an entry with a
stored operation that exceeds the limit.
OVERFLOW You attempted to enter, or you have calculated, a number that is beyond
the range of the calculator.
STAT Attempting to calculate 1-Var or 2-Var stats with no defined data
points, or attempting to calculate 2-Var stats when the data lists are
not of equal length.
FRQ DOMAIN The FRQ value in 1-Var statistics < 0.
CONVERSION The conversion does not contain a list name (L1, L2, or L3), or the
conversion for a list contains its own list name; for example, a conversion
for L1 contains L1.
You attempted to enter a function (for example, L1+3).
SYNTAX The command contains a syntax error, or has misplaced functions,
arguments, parentheses, or commas. If using P
, try using W.
OP NOT DEFINED The stored operation (op1 or op2) is not defined.