Datasheet

350
450
550
650
750
850
950
1050
1150
1250
1350
1.8 2.3 2.8 3.3 3.8 4.3 4.8 5.3 5.8 6.3 6.8 7.3
1450
OUTPUT VOLTAGE
vs
FULL-SCALE RESISTANCE
R – Full-Scale Resistance – k
( S)
W
F
V oltage – mV
O
– Output V
Full-scale DAC output
current adjustment
at 37.5- DAC terminationW
DACs
Z = 75
S
W
Z =75
(Monitor)
L
W
75- CableW
I
OUT
THS8136
SLES236B –NOVEMBER 2008–REVISED APRIL 2013 www.ti.com
Figure 2. DAC Output Termination
Figure 3. Output Voltage vs Full-Scale Resistance
The user is free to connect another resistor value, but care should be taken not to exceed the maximum current
level on each of the DAC outputs as shown in the specifications section. Additionally, DAC output linearity will
degrade if the 1.2-V maximum output compliance is exceeded.
6 Submit Documentation Feedback Copyright © 2008–2013, Texas Instruments Incorporated
Product Folder Links: THS8136