Datasheet

THS770012
www.ti.com SLOS669C –FEBRUARY 2010–REVISED JANUARY 2012
THERMAL INFORMATION
THS770012
THERMAL METRIC
(1)
UNITS
RGE (24) PINS
θ
JA
Junction-to-ambient thermal resistance 44.1
θ
JC(top)
Junction-to-case(top) thermal resistance 35
θ
JB
Junction-to-board thermal resistance 19
°C/W
ψ
JT
Junction-to-top characterization parameter 0.5
ψ
JB
Junction-to-board characterization parameter 18.8
θ
JC(bottom)
Junction-to-case(bottom) thermal resistance 8.9
(1) For more information about traditional and new thermal metrics, see the IC Package Thermal Metrics application report, SPRA953.
ELECTRICAL CHARACTERISTICS
Test conditions are at T
A
= +25°C, V
S+
= +5V, V
OCM
= +2.5V, V
OUT
= 2V
PP
, R
L
= 400Ω differential, G = +12dB, differential input
and output, and input and output referenced to midsupply, unless otherwise noted. Measured using evaluation module as
discussed in Test Circuits section.
TEST
PARAMETER TEST CONDITIONS MIN TYP MAX UNIT
LEVEL
(1)
AC PERFORMANCE
Gain = +10dB, V
OUT
= 200mV
PP
900 MHz C
Gain = +11dB, V
OUT
= 200mV
PP
810 MHz C
Small-signal bandwidth
Gain = +12dB, V
OUT
= 200mV
PP
680 MHz C
Gain = +13.7dB, V
OUT
= 200mV
PP
540 MHz C
Gain = +10dB, V
OUT
= 2V
PP
845 MHz C
Gain = +11dB, V
OUT
= 2V
PP
790 MHz C
Large-signal bandwidth
Gain = +12dB, V
OUT
= 2V
PP
680 MHz C
Gain = +13.7dB, V
OUT
= 2V
PP
548 MHz C
Bandwidth for 0.1dB flatness Gain = +12dB, V
OUT
= 2V
PP
130 MHz C
V
OUT
= 2V step 3300 V/µs C
Slew rate
V
OUT
= 4V step 3400 V/µs C
Rise time V
OUT
= 2V step 0.6 ns C
Fall time V
OUT
= 2V step 0.6 ns C
Settling time to 0.1% V
OUT
= 2V step 2.2 ns C
Input return loss, s11 See s-Parameters section, f < 200MHz –18 dB C
Output return loss, s22 See s-Parameterssection, f < 200MHz –16 dB C
Reverse isolation, s12 See s-Parameters section, f < 200MHz –60 dB C
f = 10MHz –90 dBc C
Second-order harmonic
f = 50MHz –70 dBc C
distortion, Gain = +12dB, R
L
=
f = 100MHz –73 dBc C
400Ω, V
OUT
= 2V
PP
f = 200MHz –74 dBc C
f = 10MHz –100 dBc C
Third-order harmonic distortion,
f = 50MHz –85 dBc C
Gain = +12dB, R
L
= 400Ω, V
OUT
f = 100MHz –84 dBc C
= 2V
PP
f = 200MHz –73 dBc C
f = 50MHz, 10MHz spacing –62 dBc C
Second-order intermodulation
f = 100MHz, 10MHz spacing –76 dBc C
distortion, Gain = +12dB, R
L
=
f = 150MHz, 10MHz spacing –78 dBc C
400Ω, V
OUT
= 2V
PP
f = 200MHz, 10MHz spacing –78 dBc C
(1) Test levels: (A) 100% tested at +25°C. Over-temperature limits by characterization and simulation. (B) Limits set by characterization and
simulation. (C) Typical value only for information.
Copyright © 2010–2012, Texas Instruments Incorporated Submit Documentation Feedback 3
Product Folder Link(s): THS770012