Datasheet

THS7375
SBOS449A –SEPTEMBER 2008–REVISED JANUARY 2011 www.ti.com
ELECTRICAL CHARACTERISTICS: V
S+
= +5 V (continued)
R
L
= 150 Ω to GND, dc-coupled input and output, Filter Mode, unless otherwise noted.
THS7375
TYP OVER TEMPERATURE
MIN/
0°C to –40°C to TYP/
PARAMETER TEST CONDITIONS +25°C +25°C +70°C +85°C MAX UNITS
POWER SUPPLY
Maximum operating voltage V
S+
to GND 5 5.5 5.5 5.5 Max V
Minimum operating voltage V
S+
to GND
(2)
5 2.85 2.85 2.85 Min V
Maximum quiescent current V
IN
= 0 V, V
S+
= 5 V 10.3 12.5 13.5 14.5 Max mA
Minimum quiescent current V
IN
= 0 V, V
S+
= 5 V 10.3 8 7.5 7 Min mA
Power-supply rejection (+PSRR) 53 Typ dB
DISABLE CHARACTERISTICS
(3)
V
IH
Disabled/bypass engaged
(4)
2.1 2.2 2.2 2.2 Min V
V
IL
Enabled/bypass disengaged 0.8 0.8 0.8 0.8 Max V
I
IH
0.2 Typ mA
I
IL
0.2 Typ mA
Disable time 80 Typ ns
Enable time 80 Typ ns
Bypass/filter switch time 5 Typ ns
Disabled quiescent current Disable pin = 3 V 1 10 10 10 Max mA
Disabled output impedance Disable pin = 3 V 20 ∥ 3 Typ kΩ ∥ pF
(2) The min/max values listed for this specification are ensured by design and characterization only.
(3) The logic input pins should not be left floating. They must be connected to logic low (or GND) or logic high (or V
S+
).
(4) Defined as applied logic voltage to achieve total quiescent current of less than 100 mA.
6 Submit Documentation Feedback Copyright © 2008–2011, Texas Instruments Incorporated
Product Folder Link(s): THS7375