Datasheet

THS7373
www.ti.com SBOS506A –DECEMBER 2009–REVISED AUGUST 2012
ELECTRICAL CHARACTERISTICS: V
S+
= +5 V
At T
A
= +25°C, R
L
= 150 Ω to GND, Filter mode, and dc-coupled input/output, unless otherwise noted.
THS7373
TEST
PARAMETER TEST CONDITIONS MIN TYP MAX UNITS LEVEL
(1)
AC PERFORMANCE (CVBS CHANNEL)
Passband bandwidth –1 dB; V
O
= 0.2 V
PP
and 2 V
PP
7 8.2 10.2 MHz B
Small- and large-signal bandwidth –3 dB; V
O
= 0.2 V
PP
and 2 V
PP
7.8 9.5 11.4 MHz B
With respect to 500 kHz, f = 6.75 MHz –0.9 0.2 1.1 dB A
Attenuation
With respect to 500 kHz, f = 27 MHz 42 54 dB A
Group delay f = 100 kHz 70 ns C
Group delay variation f = 5.1 MHz with respect to 100 kHz 9 ns C
Differential gain NTSC/PAL 0.15/0.25 % C
Differential phase NTSC/PAL 0.25/0.4 Degrees C
Total harmonic distortion f = 1 MHz, V
O
= 1.4 V
PP
–73 dB C
100 kHz to 6 MHz, non-weighted 70 dB C
Signal-to-noise ratio
100 kHz to 6 MHz, unified weighting 78 dB C
T
A
= +25°C 5.7 6 6.3 dB A
Gain
T
A
= –40°C to +85°C 5.65 6.35 dB B
f = 6.75 MHz 0.8 Ω C
Output impedance
Disabled 20 || 3 kΩ || pF C
Return loss f = 6.75 MHz 45 dB C
Crosstalk f = 1 MHz, CVBS channel to HD channels –86 dB C
AC PERFORMANCE (HD CHANNELS)
Passband bandwidth –1 dB; V
O
= 0.2 V
PP
and 2 V
PP
27.8 33 38.8 MHz B
Small- and large-signal bandwidth –3 dB; V
O
= 0.2 V
PP
and 2 V
PP
30.3 36 42.5 MHz B
Bypass mode bandwidth –3 dB; V
O
= 0.2 V
PP
170 375 MHz B
Slew rate Bypass mode; V
O
= 2 V
PP
400 450 V/μs B
With respect to 500 kHz, f = 27 MHz –1 –0.1 1 dB A
Attenuation
With respect to 500 kHz, f = 74 MHz 34 40 dB A
Group delay f = 100 kHz 20 ns C
Group delay variation f = 27MHz with respect to 100 kHz 6 ns C
Channel-to-channel delay 0.3 ns C
Differential gain NTSC/PAL 0.1/0.1 % C
Differential phase NTSC/PAL 0.15/0.2 Degrees C
Total harmonic distortion f = 10 MHz, V
O
= 1.4 V
PP
–55 dB C
100 kHz to 30 MHz, non-weighted 62.5 dB C
Signal-to-noise ratio
unified weighting 72 dB C
All channels, T
A
= +25°C 5.7 6 6.3 dB A
Gain
All channels, T
A
= –40°C to +85°C 5.65 6.35 dB B
f = 30 MHz, Filter mode 1.4 Ω C
Output impedance f = 30 MHz, Bypass mode 1 Ω C
Disabled 1.8 || 3 kΩ || pF C
(1) Test levels: (A) 100% tested at +25°C. Over temperature limits set by characterization and simulation. (B) Limits set by characterization
and simulation only. (C) Typical value only for information.
Copyright © 2009–2012, Texas Instruments Incorporated 5