Datasheet

THS7364
www.ti.com SBOS530 –AUGUST 2010
RECOMMENDED OPERATING CONDITIONS
MIN NOM MAX UNIT
Supply voltage, V
S+
2.7 5 V
Ambient temperature, T
A
–40 +85 °C
ELECTRICAL CHARACTERISTICS: V
S+
= +3.3 V
At T
A
= +25°C, R
L
= 150 Ω to GND, Filter mode, and dc-coupled input/output, unless otherwise noted.
THS7364
TEST
PARAMETER TEST CONDITIONS MIN TYP MAX UNITS LEVEL
(1)
AC PERFORMANCE (SD CHANNELS)
Passband bandwidth –1 dB; V
O
= 0.2 V
PP
and 2 V
PP
6.6 8.2 10 MHz B
Small- and large-signal bandwidth –3 dB; V
O
= 0.2 V
PP
and 2 V
PP
8 9.5 11 MHz B
Bypass mode bandwidth –3 dB; V
O
= 0.2 V
PP
85 150 MHz B
Slew rate Bypass mode; V
O
= 2 V
PP
70 100 V/ms B
With respect to 500 kHz
(2)
, f = 6.75 MHz –0.9 0.2 1.2 dB B
Attenuation
With respect to 500 kHz
(2)
, f = 27 MHz 42 54 dB B
Group delay f = 100 kHz 78 ns C
Group delay variation f = 5.1 MHz with respect to 100 kHz 11 ns C
Channel-to-channel delay 0.3 ns C
Differential gain NTSC/PAL 0.25/0.35 % C
Differential phase NTSC/PAL 0.4/0.5 Degrees C
Total harmonic distortion f = 1 MHz, V
O
= 1.4 V
PP
–69 dB C
100 kHz to 6 MHz, non-weighted 70 dB C
Signal-to-noise ratio
100 kHz to 6 MHz, unified weighting 78 dB C
All channels, T
A
= +25°C 5.7 6 6.3 dB A
Gain
All channels, T
A
= –40°C to +85°C 5.65 6.35 dB B
f = 6.75 MHz, Filter mode 0.9 Ω C
Output impedance f = 6.75 MHz, Bypass mode 0.9 Ω C
Disabled 20 || 3 kΩ || pF C
Return loss f = 6.75 MHz, Filter mode 44 dB C
Crosstalk f = 1 MHz, SD to SD channels –72 dB C
(1) Test levels: (A) 100% tested at +25°C. Over temperature limits set by characterization and simulation. (B) Limits set by characterization
and simulation only. (C) Typical value only for information.
(2) 3.3-V supply filter specifications are ensured by 100% testing at 5-V supply together with design and characterization.
Copyright © 2010, Texas Instruments Incorporated Submit Documentation Feedback 3
Product Folder Link(s): THS7364