Datasheet

THS7360
SLOS674 –JUNE 2010 www.ti.com
ELECTRICAL CHARACTERISTICS: V
S+
= +5 V
At T
A
= +25°C, R
L
= 150 Ω to GND, Filter mode, and dc-coupled input/output, unless otherwise noted.
THS7360
TEST
PARAMETER TEST CONDITIONS MIN TYP MAX UNITS LEVEL
(1)
AC PERFORMANCE (SD CHANNELS)
Passband bandwidth –1 dB; V
O
= 0.2 V
PP
and 2 V
PP
6.7 8.2 10 MHz B
Small- and large-signal bandwidth –3 dB; V
O
= 0.2 V
PP
and 2 V
PP
8 9.5 11.3 MHz B
Bypass mode bandwidth –3 dB; V
O
= 0.2 V
PP
30 60 MHz B
Slew rate Bypass mode; V
O
= 2 V
PP
60 150 V/ms B
With respect to 500 kHz, f = 6.75 MHz –0.8 0.4 1.3 dB A
Attenuation
With respect to 500 kHz, f = 27 MHz 42 54 dB A
Group delay f = 100 kHz 74 ns C
Group delay variation f = 5.1 MHz with respect to 100 kHz 10.5 ns C
Channel-to-channel delay 0.3 ns C
Differential gain NTSC/PAL 0.15/0.3 % C
Differential phase NTSC/PAL 0.35/0.5 Degrees C
Total harmonic distortion f = 1 MHz, V
O
= 1.4 V
PP
–73 dB C
100 kHz to 6 MHz, non-weighted 61 dB C
Signal-to-noise ratio
100 kHz to 6 MHz, unified weighting 70 dB C
Gain All channels 5.44 5.60 5.76 V/V A
f = 6.75 MHz, Filter mode 0.7 Ω C
Output impedance f = 6.75 MHz, Bypass mode 0.6 Ω C
Disabled 28 || 3 kΩ || pF C
Return loss f = 6.75 MHz, Filter mode 46 dB C
Crosstalk f = 1 MHz, SD to SD channels, input referred –58 dB C
AC PERFORMANCE (SF
(2)
CHANNELS, SD FILTER)
Passband bandwidth –1 dB; V
O
= 0.2 V
PP
and 2 V
PP
6.6 8 9.6 MHz B
Small- and large-signal bandwidth –3 dB; V
O
= 0.2 V
PP
and 2 V
PP
7.8 9.2 11 MHz B
With respect to 500 kHz, f = 6.75 MHz –0.8 0.4 1.3 dB A
Attenuation
With respect to 500 kHz, f = 27 MHz 42 50 dB A
Group delay f = 100 kHz 62 ns C
Group delay variation f = 5.1 MHz with respect to 100 kHz 10.5 ns C
Channel-to-channel delay 0.3 ns C
Total harmonic distortion f = 1 MHz, V
O
= 1.4 V
PP
–59 dB C
100 kHz to 6.75 MHz, non-weighted 58 dB C
Signal-to-noise ratio
100 kHz to 6.75 MHz, unified weighting 69 dB C
Gain All channels 4.37 4.50 4.63 V/V A
Output impedance f = 6.75 MHz 0.7 Ω C
Return loss f = 6.75MHz 46 dB C
f = 1 MHz, SF to SD channels, input referred –57 dB C
Crosstalk f = 1 MHz, SD to SF channels, input referred –56 dB C
f = 1 MHz, SF to SF channels, input referred –56 dB C
(1) Test levels: (A) 100% tested at +25°C. Over temperature limits set by characterization and simulation. (B) Limits set by characterization
and simulation only. (C) Typical value only for information.
(2) SF indicates selectable filter.
8 Submit Documentation Feedback Copyright © 2010, Texas Instruments Incorporated
Product Folder Link(s): THS7360